AP Router- 802.11 B/G/N INDOOR WIRELESS AP ROUTER(1T1R) (MN-8616C(100MW))

MN-8616C

Overview

802.11 B/G/N Indoor Wireless AP Router(1T1R)
MN-8616C(100mW)

 

802.11 B/G/N Indoor Wireless AP Router(1T1R)
MN-8616C(100mW)

 

•Support advanced 1 x 1 Technology with up to 150Mbps downstream and upstream
•Complies with 2.4GHz IEEE802.11b/g/n standards
•Low Noise Amplifier(LNA) support
•Support 20MHz and 40 MHz bandwidth
•Operation mode: Bridge, Gateway, Wireless ISP
•Wireless mode: AP, Client, WDS, AP+WDS
•DHCP Server/Client
•RF output power adjustable
•Virtual DMZ, Port Forwarding
•Dynamic DNS
•TCP/UDP/ICMP/ARP protocol stack
•Firewall, URL/IP/Port/MAC filtering
•Wireless users access control
•Multiple SSID
•NTP client
•Wireless security - 64/128bit WEP, WPA, WPA2, ACL
•Support PPPoE, VPN pass-through(PPTP and L2TP)
•QoS enhancement - WMM
•WPS(Wi-Fi Protected Setup) via PIN
•Easy quick setup wizard with web-based utility
•One detachable 2dBi antenna
•Support Power over Ethernet (PoE passive)
•WPS hardware button

 

Standard
IEEE 802.11 b/g/n
Antenna
One detachable 2dBi antenna
Chipset – Realtek RTL8196C
Frequency Band
2.400GHz ~ 2.484GHz
Data Rate
802.11b:11,5.5,2 and 1 Mbps with auto-rate fall back
802.11g:54,48,36,24,18,12,9&6Mbps
802.11n:(20MHz):up to 72Mbps
802.11n:(40MHz):up to 150Mbps
Operation Mode
Gateway
Bridge
Wireless ISP
Wireless Mode
AP
Client
WDS
AP+WDS
Security
64/128 bit WEP
WPA(TKIP with IEEE 802.1x)
WPA2(AES with IEEE 802.1x)
WPA Mixed
Media Access Control
CSMA/CA
Power requirement
12V DC
Operation Temperature
0°C ~ 60°C ambient temperature
Storage Humidity
10% ~ 90% (Non-condensing)
Sensitivity
-93dBm @ 802.11b
-91dBm @ 802.11g
-89dBm @ 802.11n
Output Power(Typical)
802.11b: up to 19 ± 1 dBm
802.11g: up to 16 ± 1 dBm
802.11n: up to 15 ± 1 dBm
Dimension(mm)
146(L) x100(W) x24(H)
Connector
Two antennas connector
One RJ-45 WAN port
Four RJ-45 LAN port
Reset to default button
Power jack
WPS button